TVS Srichakra will sponsor the MMSC Motorcycle Endurance Race 2021 with TVS Eurogrip tyres. The racing event will be held at the iconic MMRT circuit for over two hours on Sunday, March 28. Some of the country’s top riders are among the 48 team entries for this year’s event.

The two-hour endurance race will have a Le Mans (running) start and will be contested in three categories – Pro-stock; 301-400cc, Stock; 165cc (restricted to under-25 riders) and Girls (TVS Apache RTR 200) with two riders in each team.   

The Pro-Stock category will be headlined by the team of veteran international riders. Rajini Krishan and Sarath Kumar will be up against skilled pairings like Karthik Mateti - Yashas RL and Abhimanyu Gautam - Anand R in this mid-weight displacement category.

In the Stock 165cc category, Mohan Babu and Uday Prakash will be the pair to watch while the talented Lani Zena Fernandez, runner-up in the 2020 National championship, and her team-mate Arpitha Bhat are expected to dominate the Girls category on the Apache RTR 200.

P Madhavan, EVP – Sales & Marketing, TVS Srichakra Limited, said, “We are proud to partner with MMSC Motorcycle Endurance Race, and equip the bikes with our tyres. The Endurance Race will be the perfect opportunity for both aspiring and seasoned bikers. Given the challenging nature of the circuit, it will be a unique platform to showcase our products and demonstrate performance. TVS Eurogrip tyres are built for high-performance biking and are an ideal fit for this championship.” 

MMSC Vice-President Vicky Chandhok said, “We are absolutely delighted that TVS Eurogrip has made an entry into racing, and the MMSC is truly grateful for their involvement. We are also overwhelmed by the response from the riders despite the challenging conditions dictated by the pandemic. Back in 2019, we had received 32 entries, but this time, the number has exceeded our expectations.” (TT)

Ecolomondo Corporation, a leading Canadian innovator in sustainable scrap tyre recycling technology, has announced that its new milling line at Hawkesbury facility has achieved a major milestone during recent testing by reaching a throughput of approximately 2,700 lbs per hour of recovered carbon black (rCB). This result surpasses the company’s projected target of 2,200 lbs per hour.

When the new milling line is completely operational, it should be able to process 2,200 pounds of rCB per hour and provide a particle size distribution of 96 percent between 10 and 15 microns. It is anticipated that the plant would process more than 1.5 million scrap tyres annually, recovering 1,350 MT of process gas while producing 4,500 MT of recovered carbon black, 5,400 MT of oil and 2,250 MT of steel.

The company expects the commercial production of rCB to start by the end of May 2025. After being contacted, offtake clients told the company that they were eagerly expecting a larger supply of steel, oil and rCB, said the company. Depending on end-product market pricing, the company's yearly income from the sale of these sustainable goods plus tipping fees of USD 145 per metric tonne is expected to reach USD 12.1 million, with an estimated EBITDA of 45 to 50 percent, added the company statement.

Jean-François Labbé, Interim CEO, Ecolomondo Corporation, said, “This is a major achievement that brings the Hawkesbury facility closer to full production and commercialisation.”

Global speciality chemicals company Orion S.A. has launched a new bio-circular carbon black called ECOLAR 50 POWDER to provide coatings manufacturers with a new solution for more sustainable coatings.

ECOLAR 50 POWDER, which is entirely based on bio-circular feedstock, has coloristic qualities that are on par with those of ordinary speciality carbon blacks and includes 100 percent biogenic raw material according to 14C analysis. The coloristic qualities of ECOLAR 50 POWDER, a low to medium colour furnace black, offer moderate tinting strength and medium jetness in mass tone applications. ECOLAR 50 POWDER offers equivalent coloristic performance for full-tone and tinting applications, as well as comparable wetting and dispersion characteristics to conventionally manufactured low-colour furnace blacks.

ECOLAR 50 POWDER outperformed other common specialist carbon blacks in achieving medium jetness in a solvent-borne alkyd/melamine stoving enamel system. It created a similar neutral undertone as well. When tested in a water-borne 1K PU coating system, ECOLAR 50 POWDER created a more neutral undertone and jetness that was on par with other regular speciality carbon blacks.

Tilo Lindner, Vice President Global Marketing – Speciality Carbon Black, Orion, said, “We’re leading the way in advancing carbon black to meet increasing industry demands for sustainable products. ECOLAR 50 POWDER enables coatings formulators to develop truly sustainable products in all kinds of coatings applications.”

LD Carbon has inaugurated Korea’s first and largest waste tyre pyrolysis plant in Dangjin, South Korea.

Located in the Dangjin Hapdeok General Industrial Complex, the plant is expected to begin full-scale operation next month. The plant is spread over 29,800 square metres and features two factory buildings and five silos. The plant has an annual capacity to process 50 kilotonnes per annum (ktpa) of tyre chips derived from end-of-life tyres (ELTs).

At the location, LD Carbon uses a two-step pyrolysis process, first turning ELTs into solid char and pyrolysis oil. After that, the business uses a secondary pyrolysis process to further compress the char and create recovered carbon black (rCB). It is anticipated that the Dangjin facility would generate 20 ktpa of rCB and 24 ktpa of pyrolysis oil, which is a substantial increase above the combined output of 7 ktpa at its current pilot plant in Gimcheon. When compared to traditional carbon black, the rCB generated by the technique is said to lower carbon emissions by up to 32 ktpa.

The company is planning to build plants overseas and intends to join the Asian market soon. It has also struck a 10-year offtake deal with SK Incheon Petrochem for its pyrolysis oil.

Speciality chemicals company LANXESS India organised its first exclusive Solutions Day event in Mumbai today to showcase its diversified and sustainable product portfolio to customers and other key stakeholders.

The event was organised to promote the idea of ‘One LANXESS’, where its business units – namely Advanced Industrial Intermediates, Flavors & Fragrances, Inorganic Pigments, Liquid Purification Technologies, Lubricant Additives Business, Material Protection Products, Polymer Additives, Rhein Chemie and Saltigo – displayed their distinctive products and solutions at the event. It provided an opportunity to highlight the cross-business synergies that characterise LANXESS' integrated approach and to present the company's cutting-edge solutions designed for a variety of industrial applications.

Three main business sectors, namely Advanced Industrial Intermediates, Speciality Additives and Consumer Protection Products, are currently the emphasis of LANXESS's strategy shift from a polymers to speciality chemicals company. In order to improve the value provided to clients, the event sought to promote cooperation and creativity across these various business divisions. In order to promote knowledge exchange, discover possible areas for collaboration and capitalise on the capabilities of each business unit to propel overall development and success, the day included interactive workshops, technical presentations and networking opportunities.

Namitesh Roy Choudhury, Vice Chairman & Managing Director, LANXESS India, said “Our goal with Solutions Day is to strengthen our existing partnerships and explore future collaborations that support sustainable industry growth. Through this event, we want to highlight LANXESS’ integrated offerings to all our stakeholders and address the global industrial challenges through the combined power of sustainable chemistry, innovation and responsible business.”