XINGDA, a prominent global rubber reinforcement materials manufacturer, has reported an 11 per cent upswing in sales volume for the first half of 2023. The surge in performance was observed across several product categories, with steel cord sales marking an impressive nearly 12 percent growth. In comparison, bead wire and hose wire sales exhibited respective growth rates of 6 percent and 12 percent .

With operational bases spanning China and Thailand, XINGDA has asserted its market presence. In 2022, the company’s achievements were underscored by selling 1.055 million tonnes of steel wire products, securing a robust market share exceeding 30 percent within China and 20 percent internationally.

In 2023, XINGDA embarked on a strategic expansion project at its Shandong production facility, augmenting annual production capacities to 280,000 tonnes of steel cord and 100,000 tonnes of bead wire. The company has undertaken the second-phase expansion in Thailand, which is expected to increase the annual output to 250,000 tonnes of steel cord and 100,000 tonnes of bead wire, and this will become a production base for high-end products exported to Europe and North America.

XINGDA’s global outreach is substantiated by its network of branches and technical service centres spanning Europe, the United States, India, Japan, South Korea, and Brazil. Additionally, the company has established resilient logistics and warehousing systems in key global locations, encompassing the United States, Canada, Indonesia, and Europe.

Ecolomondo Corporation, a leading Canadian innovator in sustainable scrap tyre recycling technology, has announced that its new milling line at Hawkesbury facility has achieved a major milestone during recent testing by reaching a throughput of approximately 2,700 lbs per hour of recovered carbon black (rCB). This result surpasses the company’s projected target of 2,200 lbs per hour.

When the new milling line is completely operational, it should be able to process 2,200 pounds of rCB per hour and provide a particle size distribution of 96 percent between 10 and 15 microns. It is anticipated that the plant would process more than 1.5 million scrap tyres annually, recovering 1,350 MT of process gas while producing 4,500 MT of recovered carbon black, 5,400 MT of oil and 2,250 MT of steel.

The company expects the commercial production of rCB to start by the end of May 2025. After being contacted, offtake clients told the company that they were eagerly expecting a larger supply of steel, oil and rCB, said the company. Depending on end-product market pricing, the company's yearly income from the sale of these sustainable goods plus tipping fees of USD 145 per metric tonne is expected to reach USD 12.1 million, with an estimated EBITDA of 45 to 50 percent, added the company statement.

Jean-François Labbé, Interim CEO, Ecolomondo Corporation, said, “This is a major achievement that brings the Hawkesbury facility closer to full production and commercialisation.”

Global speciality chemicals company Orion S.A. has launched a new bio-circular carbon black called ECOLAR 50 POWDER to provide coatings manufacturers with a new solution for more sustainable coatings.

ECOLAR 50 POWDER, which is entirely based on bio-circular feedstock, has coloristic qualities that are on par with those of ordinary speciality carbon blacks and includes 100 percent biogenic raw material according to 14C analysis. The coloristic qualities of ECOLAR 50 POWDER, a low to medium colour furnace black, offer moderate tinting strength and medium jetness in mass tone applications. ECOLAR 50 POWDER offers equivalent coloristic performance for full-tone and tinting applications, as well as comparable wetting and dispersion characteristics to conventionally manufactured low-colour furnace blacks.

ECOLAR 50 POWDER outperformed other common specialist carbon blacks in achieving medium jetness in a solvent-borne alkyd/melamine stoving enamel system. It created a similar neutral undertone as well. When tested in a water-borne 1K PU coating system, ECOLAR 50 POWDER created a more neutral undertone and jetness that was on par with other regular speciality carbon blacks.

Tilo Lindner, Vice President Global Marketing – Speciality Carbon Black, Orion, said, “We’re leading the way in advancing carbon black to meet increasing industry demands for sustainable products. ECOLAR 50 POWDER enables coatings formulators to develop truly sustainable products in all kinds of coatings applications.”

LD Carbon has inaugurated Korea’s first and largest waste tyre pyrolysis plant in Dangjin, South Korea.

Located in the Dangjin Hapdeok General Industrial Complex, the plant is expected to begin full-scale operation next month. The plant is spread over 29,800 square metres and features two factory buildings and five silos. The plant has an annual capacity to process 50 kilotonnes per annum (ktpa) of tyre chips derived from end-of-life tyres (ELTs).

At the location, LD Carbon uses a two-step pyrolysis process, first turning ELTs into solid char and pyrolysis oil. After that, the business uses a secondary pyrolysis process to further compress the char and create recovered carbon black (rCB). It is anticipated that the Dangjin facility would generate 20 ktpa of rCB and 24 ktpa of pyrolysis oil, which is a substantial increase above the combined output of 7 ktpa at its current pilot plant in Gimcheon. When compared to traditional carbon black, the rCB generated by the technique is said to lower carbon emissions by up to 32 ktpa.

The company is planning to build plants overseas and intends to join the Asian market soon. It has also struck a 10-year offtake deal with SK Incheon Petrochem for its pyrolysis oil.

Speciality chemicals company LANXESS India organised its first exclusive Solutions Day event in Mumbai today to showcase its diversified and sustainable product portfolio to customers and other key stakeholders.

The event was organised to promote the idea of ‘One LANXESS’, where its business units – namely Advanced Industrial Intermediates, Flavors & Fragrances, Inorganic Pigments, Liquid Purification Technologies, Lubricant Additives Business, Material Protection Products, Polymer Additives, Rhein Chemie and Saltigo – displayed their distinctive products and solutions at the event. It provided an opportunity to highlight the cross-business synergies that characterise LANXESS' integrated approach and to present the company's cutting-edge solutions designed for a variety of industrial applications.

Three main business sectors, namely Advanced Industrial Intermediates, Speciality Additives and Consumer Protection Products, are currently the emphasis of LANXESS's strategy shift from a polymers to speciality chemicals company. In order to improve the value provided to clients, the event sought to promote cooperation and creativity across these various business divisions. In order to promote knowledge exchange, discover possible areas for collaboration and capitalise on the capabilities of each business unit to propel overall development and success, the day included interactive workshops, technical presentations and networking opportunities.

Namitesh Roy Choudhury, Vice Chairman & Managing Director, LANXESS India, said “Our goal with Solutions Day is to strengthen our existing partnerships and explore future collaborations that support sustainable industry growth. Through this event, we want to highlight LANXESS’ integrated offerings to all our stakeholders and address the global industrial challenges through the combined power of sustainable chemistry, innovation and responsible business.”