Hankook Tire Successfully Wraps Up IAA Transportation 2026, Debuts Winter And Trailer Tyres

Hankook Tire Successfully Wraps Up IAA Transportation 2026, Debuts Winter And Trailer Tyres

Hankook Tire wrapped up its showing at IAA Transportation 2026, the commercial vehicle industry’s largest global expo, held in Hannover, Germany, from 15 to 20 September. The company used the event to introduce three new tyres.

The debut lineup included the Smart Control AW53 and DW53 winter tyres, plus the Smart Flex TH51 trailer tyre for regional and long-haul use. All three rely on SMARTEC, Hankook’s advanced truck and bus radial technology system, which targets safety, mileage, chip and cut resistance, retreadability and braking.

The AW53 and DW53 are built for steer and drive axles respectively, delivering grip and braking on snow and ice. Testing at Hankook’s Ivalo proving ground in Finland showed gains in snow braking, acceleration and handling over the prior generation. Hidden Groove technology sustains performance as tread wears and extends tire life by as much as 15 percent.

The TH51 pursues high mileage and low rolling resistance, with zigzag grooves and drainage channels for water evacuation. Its Hidden Groove design, made possible by 3D-printed tread moulds, preserves grip to the end of service. Hankook also displayed Smart Line, e-SMART City, the Laufenn LF95+, Alphatread and Smart Fleet while continuing its presence at European events such as the Road Transport Expo, Transport Logistic and The Tire Cologne.

PRINX CHENGSHAN Displays Four Brands And New Tyre Lines At Automechanika Dubai 2026

PRINX CHENGSHAN Displays Four Brands And New Tyre Lines At Automechanika Dubai 2026

PRINX CHENGSHAN mounted a four-brand display – PRINX, CHENGSHAN, Austone and Fortune – at Automechanika Dubai 2026, the region's foremost automotive aftermarket expo that took place from 10–12 November 2026 at the Dubai Exhibition Centre in Expo City Dubai. The company used the platform to meet international customers and partners and to sound out prospects across the Middle East and Africa.

Visitors to the passenger car section saw the AQUILA REV, which trims cabin noise by 1 dB against top global rivals for a calmer ride, and which stops as surely on dry or wet asphalt as the best international offerings. Its EU-label wet grip reaches grade A, instilling confidence in rain. The XNEX SPORT EV, meanwhile, earns an A for rolling resistance, adding 5 percent to driving range, holds wet corners at a 7.9 percent higher limit speed than leading global tyres and runs 2 dB quieter than comparable products.

On the commercial side, the Xelera EcoRoute fuel-saving and Xelera Route wear-resistant lines broke cover for the first time. Xelera tyres can be equipped with the X-CHIP monitoring system, which watches load, tread depth, temperature and pressure continuously, lifting fleet efficiency and trimming running costs. PRINX aims to extend the range into mixed-service, city bus, coach and winter segments. The Fortune COACH A01, built with a tuned shoulder block ratio, crown profile and novel tread compound, resists irregular wear over high mileage, while its longitudinal grooves and patented sipes sharpen wet traction for safer coach operations.

Looking ahead, the company will harness plants in China, Thailand and Malaysia to align its industrial and supply chains. Fuelled by R&D and a strong lineup, it plans a deeper push into the Middle East and Africa, raising brand competitiveness through sharper products and localised service, and joining global partners on a sustainable path.

Vipal And Vaculug Mark Brazilian Day 2026 In UK With Record-Breaking Celebration

Vipal And Vaculug Mark Brazilian Day 2026 In UK With Record-Breaking Celebration

Vipal Rubber, one of the largest manufacturers of tyre retreading rubber globally and a leader in commercial tyre retreading in Latin America, sponsored the latest edition of Brazilian Day, which Vaculug organised in September to celebrate Brazilian Independence Day and the strong partnership between the two companies. The event took place at the Ancaster Leisure complex in the United Kingdom and drew the largest crowd in its history, with more than 200 attendees, including Vaculug employees, their families, guests and representatives from Vipal.

The gathering featured a family-friendly atmosphere that brought people together for warm and meaningful connection. Activities were offered for all ages, including sports, games and recreation spaces for children, while traditional kart races and a raffle added to the festive spirit. Inspired by Brazilian Independence celebrations, the event has become a milestone in the Vaculug-Vipal relationship.

Beyond marking commercial achievements, Brazilian Day highlights the affinity between Vipal and Vaculug and their shared commitment to long-lasting relationships built on trust and collaboration. The event reflects the strength of a partnership developed over the years and reinforces the ties between the companies and their people.

Frederico Schmidt, General Manager, Vipal EMEA, said, “Vipal is immensely pleased to attend one more edition of this event, which became an important symbol of the alliance with Vaculug. The record attendance, with so many families gathered and involved in the activities, demonstrates our relationship goes well beyond business. We share values, goals and a joint growth vision, and this engagement showcases the strength of the connection between our teams.”

Lily Watson from Vaculug’s marketing department said, “This year, the event had the largest attendance in its history and offered a fun-filled environment to get the teams closer and strengthen the bonds between Vaculug and Vipal communities. The Brazilian Day contributes to strengthening relationships and increasing the trust that boosts our daily work. We are very thankful to Frederico and the Vipal team for contributing to holding another memorable and highly successful edition.”

Yokohama Rubber Ends Multi-Tyre Era On A High With GT300 Championship

Yokohama Rubber Ends Multi-Tyre Era On A High With GT300 Championship

The Yokohama Rubber Co., Ltd. has confirmed that KONDO RACING’s No. 56 car, running on the company’s global flagship ADVAN brand tyres, secured the GT300 class championship following the eighth and final round of the 2026 AUTOBACS SUPER GT series. That concluding round took place on 8 November at Mobility Resort Motegi in Tochigi Prefecture.

The championship-winning vehicle was the No. 56 REALIZE NISSAN MECHANIC CHALLENGE GT-R, driven by Joao Paulo de Oliveira and Iori Kimura. Although the entry began the finale from 17th on the grid after qualifying, it completed the entire race without changing tyres and finished fourth, enough to claim both the GT300 Class Team and Drivers’ titles. For KONDO RACING and Oliveira, the honours mark a third team and driver crown and their first since 2022, while Kimura achieved his first driver title.


GT300 series champions Joao Paulo de Oliveira (left) and Iori Kimura (right) celebrate with KONDO RACING team director Masahiko Kondo


VENTENY Lamborghini GT3 racing from pole position to victory in season’s final race

Yokohama Rubber also concluded the final season of multi-manufacturer competition in SUPER GT on a strong note, as two other ADVAN-shod cars delivered standout results in the GT300 class at Motegi. JLOC’s No. 88 entry finished first, while seven x seven Racing’s No. 666 car came home second.


Drivers Daniil Kvyat (left) and Takashi Kogure celebrate their 1st place finish in season’s final race


seven x seven PORSCHE GT3R EVO racing to 2nd place finish in last race of 2026 season

The Round 8 winner, the No. 88 VENTENY Lamborghini GT3 piloted by Takashi Kogure and Daniil Kvyat, started from pole position and claimed its first victory of the 2026 campaign. With the No. 666 seven x seven PORSCHE GT3R EVO of Sven Muller and Taichi Watarai finishing second, the season ended with a one-two result for cars equipped with YOKOHAMA ADVAN tyres.


Drivers Sven Muller (left) and Taichi Watarai lift their 2nd place trophy

Dunlop Tyre Europe Enters Final Phase Of EUDR Implementation Ahead Of Deadline

Dunlop Tyre Europe Enters Final Phase Of EUDR Implementation Ahead Of Deadline

Dunlop Tyre Europe GmbH (DTE) has reached the final stage of its programme to implement the European Union Deforestation Regulation (EUDR, Regulation (EU) 2023/1115). The regulation mandates deforestation-free supply chains, with particular emphasis on natural rubber employed in tyre manufacturing. Its requirements will apply to large and medium-sized companies from 30 December 2026.

The European Commission’s simplification package, published on 4 May 2026, has further clarified the regulation’s practical application. Among the key changes are reduced administrative effort when due diligence information is shared along the supply chain, along with clearer definitions of roles, responsibilities and digital verification procedures. Transparency, traceability and a robust data foundation remain central to the regulation. DTE regards these developments as confirmation of its chosen implementation approach.

DTE has established EUDR processes across the entire supply chain, from import and goods receipt through warehousing to shipment and export. Integration between SAP, the EU information system TRACES and logistics and barcode systems has been completed. A validation process at goods receipt serves as a key control mechanism, and process, data, and interface testing across the full supply chain has already been successfully completed. Due Diligence Statements (DDS) can now be provided and transferred transparently along the supply chain, enabling DTE to demonstrate EUDR compliance efficiently both as an importer and as a downstream operator while leveraging already validated information from upstream supply chain partners.

Until 30 December 2026, DTE will concentrate on further improving data quality, increasing the automation of verification processes, preparing for audits and expanding digital connectivity for customers, including via EDI-Wheel. After the go-live date, the project will transition into regular business operations. Transparency and seamless connectivity remain key priorities for DTE customers, who will continue to receive regular updates on important project milestones, new requirements and available digital interfaces.

Stephan Stenger, Head of Supply Chain & Operations, Dunlop Tyre Europe GmbH, said, "Our customers will benefit from significantly simplified processes. Automated checks will accelerate workflows and reduce the need for manual follow-up inquiries. At the same time, we are continuously improving data quality, increasing transparency throughout the supply chain and supporting compliance with regulatory requirements. Digital interfaces will make information exchange even more efficient. Finally, our audit preparation efforts are creating reliable processes and robust documentation that will provide long-term value to our customers.”