Maxion Wheels will showcase a low‑carbon commercial vehicle steel wheel at IFAT Munich as part of the Daimler Truck–led reECONIC concept vehicle. The component demonstrates how circular material strategies and advanced engineering can significantly cut carbon footprints at the individual part level.

For the reECONIC project, Maxion Wheels developed a 22.5-inch x 9.00-inch steel wheel that achieves a CO2 footprint reduction of more than 50 percent compared with conventionally manufactured counterparts. The wheel weighs 32.5 kilogrammes and was produced using electric arc furnace steel with a high proportion of post‑consumer recycled scrap.

The wheel’s cradle‑to‑gate CO2 footprint fell from 132.7 kilogrammes to 61.4 kilogrammes per wheel through a combination of CO2‑reduced steel, optimised design and responsible material selection, all without compromising functionality, performance or safety. Given that steel wheels are safety‑critical and among the heaviest parts of a commercial vehicle, their mass and material composition make them a key lever for emissions reduction and overall vehicle efficiency.

Maxion applied its proprietary Lightweighting Process, which integrates performance, safety and production parameters into advanced structural design and simulation tools. This enabled a 2-kg weight saving compared with previous designs, lowering material demand and further reducing the carbon footprint. However, the majority of the emissions reduction came from material circularity, since raw materials account for roughly 75 to 85 percent of a steel wheel’s CO2 footprint.

Using high‑share post‑consumer recycled scrap via the electric arc furnace route lowers primary raw material demand, reduces iron ore mining and cuts energy‑intensive processing steps. The wheel was engineered at Maxion’s Global Engineering Center and plant in Königswinter, Germany, using industrially proven processes suitable for future scale‑up. Daimler Truck intends the reECONIC project as a pathway to series production, with real‑world testing starting in the second half of 2026.

The reECONIC vehicle will be unveiled at IFAT Munich from 4–7 May 2026, where it will be displayed and demonstrated as part of Daimler Truck’s circular‑economy initiative. The project confirms that circular design and recycled materials can be applied to high‑volume, heavily loaded parts, offering tangible CO2 savings within existing manufacturing frameworks.

Karl Rode, Director of Engineering at Maxion Wheels, said, “The reECONIC project allowed us to apply our engineering and material expertise to a clearly defined circular‑economy objective. By combining recycled‑material‑rich steel with targeted design optimisation, we were able to more than halve the CO2 footprint of a safety‑critical steel wheel using industrially feasible processes.”

Stan Mommers, Vice President Sales EMEA at Maxion Wheels, said, “Working with Daimler Truck on reECONIC shows how suppliers and OEMs can jointly translate circular‑economy principles into measurable results. Component‑level innovations like this steel wheel are essential for enabling lower‑carbon commercial vehicles in the future.”

Comments (0)

ADD COMMENT

Link Copied!

The Association of Natural Rubber Producing Countries (ANRPC) is convening a major sustainability forum in Kochi, India, on 19 August 2026. The day-long event, running from 9:00 AM to 4:30 PM IST at the Crowne Plaza, represents a critical milestone for the natural rubber sector. Building upon the foundational discussions from the 2025 ANRPC meetings and the recent COP30 conference, the forum will unite member governments, industry leaders, non-governmental organisations and compliance bodies to advance a unified sustainability agenda.

The core objective of the gathering is to secure endorsement for the ANRPC’s Sustainable Natural Rubber Guidelines. A primary focus will be on deploying open-source traceability tools designed to facilitate compliance with the European Union Deforestation Regulation while ensuring that these measures do not impose additional financial burdens on smallholders and small-to-medium enterprises. The thematic discussions will be structured around environmental responsibility, including net-zero strategies, economic sustainability to protect smallholder livelihoods and fair pricing and market adaptation through sustainable finance for emerging sectors like electric vehicles and green construction.

The programme will feature five dedicated sessions covering net-zero pathways, national progress reports from India, Malaysia and Thailand and industry case studies from Indonesia, Cambodia and Vietnam. A key panel discussion will see government representatives and supply chain actors making future commitments. Attendance is targeted at ANRPC member states, supply chain stakeholders, rubber associations, environmental groups and relevant compliance organisations.

Comments (0)

ADD COMMENT

Link Copied!

Tolins Tyres Ltd has announced that its wholly owned subsidiary, Terra Rubber Pvt Ltd, has entered into a purchase agreement with Cochin Reclaim and Rubbers Pvt Ltd to acquire plant and machinery as part of its capacity expansion and backward integration strategy.

The agreement, executed on 1 July 2026, involves the purchase of identified plant and machinery from Cochin Reclaim, an unrelated third party. According to the company, the acquisition is intended to strengthen Terra Rubber's manufacturing capabilities through increased capacity and greater backward integration.

Under the terms of the agreement, Terra Rubber will acquire the machinery on an "as-is, where-is" basis. The subsidiary is required to remove the equipment from Cochin Reclaim's premises within 60 days at its own expense. Ownership of each item will transfer only after full payment has been made and the machinery has been physically removed.

Tolins Tyres said the transaction is a routine purchase undertaken in the ordinary course of business and will have no impact on the management or control of the listed company. It added that neither Terra Rubber nor Tolins Tyres holds any shareholding in Cochin Reclaim.

The company also confirmed that the transaction is not a related-party transaction, has been negotiated on an arm's length basis, and that Cochin Reclaim has no relationship with the company's promoter group or board of directors.

Comments (0)

ADD COMMENT

Link Copied!

Nokian Tyres delivered a sharp improvement in second-quarter profitability as higher sales volumes, stronger pricing and lower manufacturing costs boosted earnings, while the company said it is entering a new phase focused on profitable growth after completing its major investment programme.

Net sales rose 10.6 percent year on year to €379.9 million in the April–June quarter, while operating profit more than doubled to €34.8 million from €14.8 million. Segment operating profit increased 71 percent to €45 million, driven by higher sales and improved manufacturing efficiency.

For the first six months of 2026, revenue increased 7.6 percent to €659.6 million, while segment operating profit climbed to €40.7million, more than five times the €7.8 million reported a year earlier. Operating profit returned to positive territory at €17 million, compared with a loss of €21.1 million in the first half of 2025.

"We delivered a strong quarter in line with our strategic ambition," said Paolo Pompei, President and Chief Executive. "Operating profit increased by 136 percent, driven by higher sales volumes and enhanced pricing."

Passenger car tyres lead recovery

The Passenger Car Tyres business remained the principal growth engine, with quarterly sales increasing 13.9 percent to €235 million, while segment operating profit more than doubled to €35.5 million. Heavy Tyres also returned to growth, posting a 10.4 percent increase in sales, although profitability at retail chain Vianor remained under pressure from cost inflation and seasonal factors.

Chief financial officer Timo Koponen said higher sales volumes remained the largest driver of earnings improvement.

"The Passenger Car Tyres continued their very strong performance also in Q2," he said, adding that the business had benefited from improved pricing, a richer product mix and lower raw material costs.

Management also highlighted six consecutive quarters of positive price and mix development, reflecting its strategy of moving further into premium products and larger rim-size tyres.

Romania becomes a strategic growth engine

Nokian Tyres said its new manufacturing facility in Romania is performing ahead of plan and is playing a key role in rebuilding capacity following the exit from Russia.

Sales in Central and Southern Europe rose 31.3 percent during the quarter, supported by higher production from the Romanian plant. "Everything is developing in this area according to plan," Pompei told analysts, referring to the Romanian factory.

He added that the new manufacturing footprint, together with recently launched products, was enabling the company to regain market share.

"We lost a significant amount of sales when we couldn't leverage our manufacturing facility in Russia at the end of 2022. Now, obviously, we are approaching the market with a new spirit, regaining market share in all the key markets where we believe we can be successful."

The company said contract manufacturing would continue to account for around 10 percent of total production, allowing it to focus internal capacity on strategically important products.

Investment phase winds down

Having invested heavily over recent years to rebuild its manufacturing network, Nokian Tyres is now shifting its attention towards cash generation and returns.

Capital expenditure in the first half fell to €24.5 million, compared with €89.7 million a year earlier. The company expects full-year capital expenditure to remain below €100 million, substantially lower than previous years.

"Following the successful completion of our major investment phase, capital expenditure will be somewhat lower this year than in the previous year," Pompei said.

Koponen said lower capital expenditure and stronger earnings had improved free cash flow, although higher receivables linked to increased sales continued to weigh on working capital. He added that net debt declined by €49m during the quarter while liquidity remained strong.

Premium positioning remains central

Nokian Tyres continues to focus on premium products rather than competing in lower-priced market segments.

The company said all-season tyres continued to outperform the broader market, while its flagship Hakkapeliitta 01 winter tyre had received a positive customer response.

Pompei said the strategy remains centred on strengthening brand equity and improving margins.

"We keep pushing our premium positioning, strengthening our brand through strong marketing investments, new products, and, in particular, better prices," he said.

Outlook unchanged despite uncertainty

Nokian Tyres maintained its full-year guidance, forecasting revenue growth in 2026 and a segment operating margin of 8–10 percent.

While management expects replacement tyre demand to remain broadly stable, it acknowledged that geopolitical tensions, tariffs and raw material price volatility continue to create uncertainty.

"We continue to focus on executing our strategy, strengthening our premium positioning, and improving profitability," Pompei said. "While there is still work ahead, we are on the right path to deliver profitable growth and create long-term value for all our stakeholders."

Comments (0)

ADD COMMENT

Link Copied!

Yokohama has announced the death of Simon Clarke, its Motorsport and Technical Manager, who was killed in a motorcycle collision on 12 July.

Clarke, who joined Yokohama HPT in 1993, spent more than three decades with the company and became a key member of its UK and European motorsport operations. He played a leading role in numerous domestic and international race series, while also supporting major European motorsport events at the request of Yokohama's global headquarters.

In addition to his motorsport responsibilities, Clarke led tyre development programmes for UK vehicle manufacturers. He also served as chairman of the Motorsport UK Production Tyre Panel and held a certified Claims Adjuster licence.

Yokohama said Clarke was a respected colleague and close friend to many across its UK business, the wider Yokohama organisation and the tyre and motorsport industries.

Outside work, Clarke was described as a devoted family man who enjoyed travelling and spending time with friends.

"Simon will be deeply missed by everyone who had the privilege of knowing him," the company said.

Yokohama extended its condolences to Clarke's family

Comments (0)

ADD COMMENT

Link Copied!