Pirelli Ready For Shanghai As F1 Sprint Returns With New Trophy Design

Pirelli Ready For Shanghai As F1 Sprint Returns With New Trophy Design

Pirelli is all set for the Chinese Grand Prix, which marks the first Sprint weekend of the 2026 Formula 1 season and will see the presentation of the newly redesigned Pirelli Sprint Qualifying Award. The second round of the championship will feature a 19-lap short race on Saturday, the first of six such events scheduled for the year.

The tyre allocation for the event remains unchanged from previous years, with teams supplied the C2, C3 and C4 compounds for the 5.451-kilometre Shanghai International Circuit. The track layout, inspired by the ‘shang’ ideogram, includes two primary straights and sixteen corners. One notable straight connects a slightly banked Turn 13 to Turn 14, while the other, which exceeds one kilometre in length, is where the starting grid is situated.

The circuit presents a varied challenge with a mix of high-speed corners, such as the sweeping Turns 7 and 8, and slower sections found at Turns 1, 3, 6 and 14. These demanding sequences, combined with fast straights, place significant stress on the tyres and will test the energy recovery capabilities of the new power units. Drivers may face difficulties with corner-entry lock-ups under heavy braking, similar to issues observed during pre-season testing in Bahrain, which features comparable braking zones.

A key variable for the weekend is the track surface, which was completely resurfaced in August 2024. The new asphalt initially provided higher grip and lower lap times, but its smoothness led to front-axle graining during the 2025 event, particularly in the Sprint race. However, as the surface has had another year to age, grip levels might be slightly reduced, potentially lowering the risk of graining. This will be assessed in early practice sessions. Teams’ simulation data suggests lap times will be closely matched to last year’s, indicating that the performance loss expected from the new car generation may be offset by other factors.

Looking back at the 2025 race, most drivers started on the Medium compound, with only three opting for the Hard. The Soft tyre was unused in the Grand Prix. The winning strategy was a one-stop, featuring a long final stint on the Hard tyre, which proved durable and resistant to graining. The podium finishers made their sole pit stops between laps 14 and 15, with Oscar Piastri taking victory ahead of Lando Norris and George Russell.

The trophy for the pole-sitter features a Soft tyre above a base embedded with a helmet decorated in the colours of the Chinese flag, which will be engraved with the winner’s name and car number. The Chinese Grand Prix returns for its 19th running at this venue, having first appeared on the calendar in 2004. Lewis Hamilton and Mercedes share the record for the most wins here, with six each. Hamilton also holds the record for the most podium finishes, with nine.

To celebrate the event, a special podium cap has been created in imperial yellow, a colour traditionally associated with prestige. It features designs commemorating the Year of the Horse and will be available for purchase on the Pirelli e-commerce platform.

TyreSafe And West Yorkshire Police Join Forces On Tyre Safety

TyreSafe And West Yorkshire Police Join Forces On Tyre Safety

TyreSafe, UK’s leading tyre safety charity, has entered a new partnership with West Yorkshire Police, reinforcing a joint commitment to road safety and reducing fatalities and serious injuries across the county. The collaboration arrives amid concerning road safety figures, with 51 deaths and 1,210 serious injuries recorded on West Yorkshire’s roads in 2025.

The two organisations will work together to highlight the essential role tyres play in road user safety. Drivers will be encouraged to perform routine checks on tyre pressure, tread depth and overall condition. The initiative also supports West Yorkshire Vision Zero, which aims to eliminate deaths and serious injuries from the county’s roads.

West Yorkshire Police becomes part of a growing network of over 260 organisations partnering with TyreSafe to promote safer motoring and enhance public understanding of tyre safety. A rising number of police forces now recognise tyre safety as a vital component of their broader road safety efforts.

As the sole point of contact between a vehicle and the road, properly maintained tyres are critical for braking, steering and grip, especially in difficult conditions. TyreSafe advises road users to check their tyres monthly and before long journeys, helping identify pressure, tread and condition issues before they become safety risks. This partnership marks another significant step in TyreSafe’s mission to reduce tyre-related incidents and improve road safety across Britain.

Stuart Lovatt, Chairman, TyreSafe, said, “We are delighted to welcome West Yorkshire Police as a TyreSafe partner. The fact that 51 people lost their lives and more than 1,200 suffered serious injuries on West Yorkshire’s roads in 2025 is a stark reminder that there is still so much work to do. Road safety requires a collective effort, and partnerships such as this are incredibly important. By combining the reach and expertise of West Yorkshire Police with TyreSafe’s specialist knowledge and campaigns, we can help ensure more road users understand the simple but crucial role their tyres play in keeping themselves and others safe.”

Inspector Claire Gray, Roads Policing Support and Proactive Intercept Team Inspector for West Yorkshire Police, said, “Every death and serious injury on our roads has a devastating impact on families, friends and communities. We are committed to working with partners to make West Yorkshire’s roads safer and to support the Vision Zero ambition. Vehicle safety is an important part of that work, and tyres are fundamental to a vehicle’s ability to stop, steer and maintain grip. We are pleased to be working with TyreSafe to help raise awareness and encourage road users to take responsibility for checking and maintaining their tyres.”

Hankook Showcases First Pre-Production Tyre From Expanded Rácalmás Facility For CVs

Hankook Showcases First Pre-Production Tyre From Expanded Rácalmás Facility For CVs

Hankook Tire has completed a significant expansion of its European manufacturing facility in Rácalmás, Hungary, marking the company's first production of truck and bus tyres on the continent. The new line, representing an investment of EUR 540 million, is scheduled to commence operations in October and has been configured to deliver more than 800,000 units annually. The first pre-production tyre from these facilities was officially unveiled at the ongoing IAA Transportation exhibition.

Previously, Hankook supplied European commercial vehicle customers exclusively from plants in Korea and China. The Hungarian line substantially reduces delivery distances, strengthening supply reliability and cutting lead times. Logistics-related carbon dioxide emissions also decline as lengthy transport routes from Asia are partially eliminated. Europe represents roughly 45 percent of Hankook's worldwide sales, making it a critical market for the tyre maker.

The Rácalmás site has received approximately EUR 856 million across three earlier expansion phases since 2007, with the third stage finishing in spring 2015. It now produces as many as 17 million tyres yearly for passenger cars, SUVs and light commercial vehicles. The fourth phase added the truck and bus tyre line and has seen around 66,000 square metres of production and support buildings constructed since 2024. More than 450 local jobs are being created. Globally, Hankook operates eight plants with capacity for up to 100 million tyres annually and employs about 20,000 people.

Designed as a highly automated facility, the new line relies on automated logistics systems, autonomous guided vehicles and real-time tracking to manage material flow and warehousing, while automated testing ensures consistent quality. Sustainability guided planning and operation through energy-efficient systems, optimised supply infrastructure and modern process controls that lower energy and water use. The plant earned ISCC PLUS certification in 2023. Production will initially centre on 22.5-inch truck and bus tyres, gradually broadening as capacity and approvals allow.

Jongho Park, President and COO, Hankook Tire Europe, said, “The expansion of our European production plant with a new line for truck and bus tyres is yet another key milestone for Hankook in Europe. The central location of the facilities in Hungary and their proximity to the core European markets is a key locational advantage. It will enable us to supply our European customers with premium commercial vehicle tyres even more reliably and quickly, and to respond to their needs with the greatest possible flexibility.”

Ho Taek Lim, Vice President and Managing Director of the plant in Rácalmás, said, “This expansion project was one of the largest industrial development projects ever undertaken at the site in Hungary. The new truck and bus tyre production facilities will transform the plant into a comprehensive production site of significantly greater complexity and with a higher level of automation.”

Continental Expands Ultra-High-Performance Tyre Portfolio

Continental Expands Ultra-High-Performance Tyre Portfolio

Continental has expanded its global ultra-high-performance tyre portfolio, covering sizes 18 inches and above, over five years and plans further growth. By late 2027, it will add over 650 new sizes across all lines for original equipment and replacement markets. This responds to demand for tyres suited to larger, heavier, more powerful and electrified vehicles, supporting profitable growth.

UHP tyres for passenger cars and light commercial vehicles now matter more to Continental and its customers. From 2020 to 2025, their share of global passenger-car tyre sales across all brands rose from 41 to 55 percent. Asia-Pacific leads at 70 percent, the Americas at 66 percent and EMEA at 43 percent. For the Continental brand, the share grew from about 49 to 62 percent.

The trend towards larger tyres links to vehicle market shifts. Cars are becoming bigger, heavier and more powerful, with SUVs increasingly common. Electric mobility is another weight driver, since batteries add considerable mass. Modern drivetrains also produce torque once associated only with high-performance sports cars. These changes demand more from tyres, which must support heavier loads while ensuring safety, efficiency and comfort.

UHP tyres combine high grip, short braking distances and precise handling with low rolling resistance and high mileage. Continental develops them mainly for wheel-and-tyre combinations of 18 inches and above, performance SUVs, premium sedans, sports cars and high-performance electric vehicles. It is expanding this range across major markets, adding over 650 sizes by the end of 2027, including secondary brands such as Semperit and Uniroyal.

This reflects growing vehicle market diversification, as manufacturers offer more variants and need tyres tailored to differing performance, efficiency and comfort requirements. UHP tyres must meet conflicting demands, balancing grip, braking, handling, rolling resistance, comfort and mileage, with rubber compounds playing a central role. Continental relies on simulations, laboratory analyses, bench tests and driving tests across varied conditions, with the High Performance Technology Center in Korbach driving manufacturing advances applied globally, where UHP tyres up to 24 inches are made.

Testing occurs at the Contidrom near Hannover, Arvidsjaur in Sweden and Uvalde in Texas, focusing on braking, handling, high-speed capability, comfort and durability. Collaboration with tuners ABT Sportsline and BRABUS, plus motorsport input through Hoosier, further advances development. The SportContact 7 exemplifies the segment, available from 18 to 24 inches and approved by Audi, BMW, BYD, Maserati, Mercedes-Benz, Polestar, Porsche, Volkswagen and Zeekr, ranking top three in 27 of 29 international tests.

Edwin Goudswaard, head of Research and Development for Continental’s Tires group sector, said, “With our expanded UHP portfolio, we are responding directly to the increasing demands of modern vehicles. This enables us to offer our customers around the world even more tailored solutions for safety, efficiency and driving dynamics. As modern tyres become larger, heavier and more powerful, tyres are becoming even more critical. They are no longer simply the vehicle’s connection to the road, but a key prerequisite for safety, efficiency and driving dynamics. The UHP segment clearly demonstrates how capable modern tyres need to be. The art lies in combining conflicting requirements at the highest level, and that is precisely what sets our tyres apart.”

Yokohama Rubber Celebrates Overall Win At Nürburgring NLS Round 8

Yokohama Rubber Celebrates Overall Win At Nürburgring NLS Round 8

The Yokohama Rubber Co., Ltd. has announced that a car equipped with its ADVAN flagship tyres claimed overall victory at the 2026 Nürburgring Langstrecken-Serie (NLS) Round 8 in Germany on 12 September. The ADVAN racing tyres delivered the grip and durability required to succeed in the demanding endurance event.

The winning entry was the No. 77 BMW M Motorsport car, fielded by Schubert Motorsport. It started from the front row, took the lead early and stayed with the front-runners throughout. After moving back ahead on lap 24, it resisted heavy pressure from closely pursuing rivals and crossed the line just 0.308 seconds clear of the second-place finisher.

This season marks the first collaboration between Yokohama Rubber and BMW M Motorsport in almost 40 years. The No. 77 BMW M4 GT3 EVO, featuring ADVAN’s ‘Red in Black’ livery, has been consistently competitive, winning Rounds 3 and 8 while finishing second in Rounds 6 and 7.

Following Round 9 on 13 September, the car leads the NLS Speed Trophy standings, awarded for the most points across all classes. The ‘Red in Black’ entry will seek to secure the trophy and the series title in October’s final round.