Apollo Tyres, one of the leading tyre makers in India, has expanded its Vredestein’s range for premium and luxury SUVs. 

The company has launched Vredestein Pinza HT (highway terrain), a global product, for the premium SUVs in India in 16–18 inch sizes, while the existing Vredestein Ultrac Vorti i has been expanded for luxury SUVs by introducing it in 21- and 22-inches.

Apollo Tyres states that the ultra ultra-high performance (UUHP) Vredestein Ultrac Vorti i will be the first tyres to be produced in India, in such higher sizes. The Ultrac Vorti i, in 21- and 22-inches, is targeted for fitment in vehicles like Mercedes GLS, Lamborghini Urus, Porshe Macan, Mercedes G Wagon and Range Rover Sports among others. 

The Vredestein Pinza HT it claims has been ranked amongst top 3 premium HT tyres in the USA, the biggest SUV market in the world, and has also won the good design award from Chicago Athenaeum Museum of Architecture and Design. Pinza HT would be available for fitment in vehicles like Toyota Fortuner, new gen Tata Safari and Mahindra Scorpio N, along with previous generation Scorpio and Safari.

Rajesh Dahiya, Vice-President, Sales and Service, Apollo Tyres said “With the ‘YOLO’ generation driving the growth in the premium and luxury SUV segment in India, this is right time for us to expand the Vredestein range catering to these segments. The designer and ultra-high performance tyres from Vredestein will accentuate the vehicle’s appearance, which is considered as an extension of the lifestyle of the young professionals.” 

The Vredestein Pinza HT has been developed keeping the comfort and safety of the driver in mind, with maximum wear life and durability, and with a uniquely designed visual identity. Large and independent staggered tread blocks are designed to deliver better cornering stability with improved noise. Generous pass-through notches, dense sipes and large circumferential grooves help evacuate water, improves hydroplaning along with better grip on slippery or wet road conditions. Special tread compound is applied for all season performance.

The Vredestein Ultrac Vorti i on the other hand has been developed for the powerful cars, and provide high levels of steering precision and grip for a thrilling drive experience at high speeds with utmost safety. These tyres also carry the signature tough of renowned automobile designer, Giorgetto Giugiaro, making them one of the most aesthetic ultra-high-performance tyres, which are being manufactured in India, and meets all the global standards.

Comments (0)

ADD COMMENT

Link Copied!

Vaculug, Europe’s largest independent retreader producing high-quality OTR and truck retread tyres for fleets across the UK and Europe, has expanded its UK presence by acquiring Tyrefair in Kinross, Scotland.

This strategic acquisition extends the company's award-winning service further north, ensuring Scottish customers receive the same high-quality OTR and truck retread tyres Vaculug has supplied for 75 years. Since the purchase, the Kinross location has already grown by 25 percent, with an ambitious target to double its business within a year and then double it again.

This move is a key part of Vaculug's 2026 growth strategy, focused on strategic acquisitions that enable better, faster and more sustainable customer service. The acquisition reinforces Vaculug’s long-standing environmental mission, marking a new chapter of sustainable growth with a strengthened Scottish operation.

Comments (0)

ADD COMMENT

Link Copied!

Nokian Tyres is expanding its US presence through a new nationwide partnership with American Tire Distributors (ATD). This agreement provides Nokian access to ATD’s vast network of over 110 distribution centres, serving roughly 80,000 customers.

The collaboration will efficiently supply tyre shops with Nokian’s complete product lineup, enabling dealers to broaden their inventory. Both companies bring 90 years of experience and a shared dedication to innovation, safety and sustainability. This partnership will offer drivers more choices, supported by Nokian’s award-winning Tennessee factory and ATD’s technology-driven logistics.

This enhanced distribution capability ensures that consumers will have greater access to a full spectrum of high-performance tyres, meeting diverse driving needs and conditions. The alliance strengthens both brands' market positions by combining premium products with an unparalleled delivery system, ultimately improving service for dealers and drivers alike across the country.

Chris Ostrander, SVP, North America, Nokian Tyres, said, “The partnership with ATD enables us to reach more tyre shops and more drivers than ever before. ATD’s robust distribution network, customer service and responsiveness strengthen our agility to serve both new and existing customers.”

Comments (0)

ADD COMMENT

Link Copied!

The U.S. Tire Manufacturers Association (USTMA) has announced a new webinar series designed to advance the circular economy for end-of-life tyres (ELTs) in collaboration with the Tire Recycling Foundation. Titled ‘The Road to 100% Tire Circularity: ELTs Going Full Circle’, the initiative aims to foster the development of scalable and profitable markets for recycled tyres. The series will launch in September 2025 and continue through February 2026.

Hosted by John Sheerin, USTMA’s Senior Director of ELT Programs, each session will convene industry experts, recyclers and state policymakers. Their discussions will focus on the latest research and real-world applications that transform waste tyres into valuable resources, thereby diverting them from landfills and generating environmental, industrial and economic benefits.

The programme will explore three of the most promising markets for end-of-life tyres. It begins on 23 September 2025 with a session on tyre-derived aggregate (TDA), examining its use in civil engineering projects like structural fill and stormwater management. A subsequent webinar on 30 October 2025 will cover the growing market for moulded and extruded products made from recycled rubber.

A significant portion of the series will be dedicated to rubber-modified asphalt (RMA), a material known for creating longer-lasting and more sustainable roadways. An introductory session on 20 November 2025 will review the overall performance and benefits of RMA. This will be followed by two regional deep dives: one on 14 January 2026, focusing on practical applications in Midwestern states like Michigan and Ohio, and another on 28 January 2026, exploring its adoption in Southern states including Kentucky and Georgia. The series will culminate on 24 February 2026 with a capstone session providing a comprehensive overview of grant and funding opportunities available to support the growth of these ELT markets.

This initiative addresses a critical need. While tyres are one of the most recycled products in US, and stockpiles have been reduced by 94 percent over the past three decades, the generation of end-of-life tyres continues to outpace their consumption in recycling markets. The webinar series is presented as a strategic pathway to bridge this gap by promoting innovative and sustainable end-use applications.

Those interested in shaping the future of tyre management are encouraged to register for any or all of the webinars through the USTMA website. Attendees will receive a resource kit after each session to help facilitate further discussion and action.

Anne Forristall Luke, President & CEO, USTMA, said, “We view these webinars as a crucial opportunity to connect key leaders across the country and show them that sustainability and economic growth go hand-in-hand. By showcasing proven applications and providing the tools to act, we can collectively turn ELTs from a waste challenge into an economic engine.”

Sheerin said, “As we look to expand ELT markets and unlock the full environmental and economic potential of end-of-life tyres, collaboration is essential. And no one can do it alone. State DOTs, regulators, recyclers and manufacturers must work together to help grow ELT markets through targeted investment, supportive policy and continued research.”

Comments (0)

ADD COMMENT

Link Copied!

Continental is accelerating its commitment to sustainability by integrating a growing proportion of renewable and recycled materials into its tyre manufacturing. The company’s current average of 26 percent is projected to rise by several percentage points within the year, with a strategic goal of reaching at least 40 percent by 2030. A central pillar of this initiative involves rethinking the sourcing of two essential components: rubber and resins.

Rubber is a fundamental material, constituting up to 40 percent of a modern high-performance tyre’s weight. Continental utilises a complex blend of up to 100 different raw materials, engineered into numerous customised rubber compounds for each tyre. The portfolio includes both natural rubber, prized for its durability and resistance in critical areas like truck treads, and synthetic rubber, which enhances braking performance and rolling resistance in passenger vehicles. The company is now progressively replacing conventional fossil-based synthetic rubber with more sustainable alternatives. This includes synthetic rubber derived from used cooking oil and pyrolysis oil from end-of-life tyres, sourced from certified partners like Synthos and TotalEnergies Cray Valley.

Complementing rubber, specialised resins are vital for optimising a tyre’s performance characteristics. These resins help fine-tune the balance between elasticity and resilience, which directly improves wet grip, abrasion resistance and energy efficiency. Continental is incorporating circular resins, also certified under the ISCC PLUS standard, which originate from renewable feedstocks like vegetable oil or used cooking oil.

Furthermore, the company is adopting sustainable alternatives for key additives. For instance, it is the first tyre manufacturer to use a certified biocircular version of the antioxidant TMQ. Produced from waste materials such as recycled cooking oil, this additive achieves a carbon footprint over 30 percent lower than its conventional counterpart.

To systematically track and scale the use of these sustainable materials, Continental employs a mass balance approach. This method allows fossil-based, renewable and recycled feedstocks to be mixed in production while accurately attributing the sustainable content to the final product. This system provides verifiable documentation and enables Continental to continuously increase its use of certified materials across its entire tyre range.

Jorge Almeida, Head of Sustainability at Continental Tires, said, “We’re closing the loop: Continental is ramping up its commitment to a circular economy and mapping out its path for the future. Innovative solutions enable us to use more sustainable raw materials, such as synthetic rubber made from used cooking oil or resins based on certified renewable feedstocks originally derived from vegetable oil.”

Matthias Haufe, Head of Material Development and Industrialisation at Continental Tires, said, “The mass balance approach enables us to efficiently manage the complexity of the raw materials portfolio and track how these raw materials are used at multiple production sites in a wide range of markets. In this way, we can steadily increase the share of renewable and recycled materials in our tyre production – and transparently document the progress we make.”

Comments (0)

ADD COMMENT

Link Copied!